Options and Accessories for XUED

Options and Accessories  

Weatherhood

Optional

Drain Connection

Optional

Access Doors

Optional

Welded Scroll Construction

Optional

Equipment Supports

Optional

Extended Lube Lines

Optional

Inlet and Outlet Guards

Optional

Aluminum Construction

Optional

Inlet Vane Dampers

Optional

Coatings

Optional

Vibration Isolators

Optional

Flanged Inlet and Outlet

Optional

Heat Slinger and Shaft Seal

Optional

Dampers

Optional

Disconnect Switches

Optional

Wiring Pigtail

Optional

Weatherhood – Weatherhoods are available to completely cover the motor and drive compartments to protect the shaft, bearings, motor, and drive components from moisture and other adverse conditions. Weatherhoods are vented to provide sufficient motor cooling.

Drain Connection – Threaded drain connections can be provided to drain moisture from the bottom of the fan housing.

Access Doors – Access doors provide access for inspection and cleaning. Both, bolted or hinged quick opening (Series 100), access doors are available.

Welded Scroll Construction – Welded scroll construction is available on Series 200 XUEBs.

Equipment Supports – Models GESS and GESR equipment supports are available to you for roof mounting of all utility fans. Equipment supports are available in a number of lengths, widths and heights, and can also be built for a pitched roof.

Extended Lube Lines – Lubrication lines with grease fittings are extended from shaft bearings to the base of the drive frame panel for easy bearing lubrication without disassembling the fan.

Inlet & Outlet Guards – Inlet and outlet guards are constructed of expanded metal mounted in a steel frame to provide protection for non-ducted installations. The guards can be easily removed for maintenance or inspection.

Aluminum Construction – Aluminum airstream option is available on XUEB Series 200.

Inlet Vane Dampers – External inlet vane dampers are available on model XUEB fans sizes 112-124 and 212-236. Eternal vanes are mounted on the inlet flange. Inlet vane dampers feature zinc plated steel blade axles, stainless steel washers and bearings. Vanes can be used for either manual or automatic operation, with controls furnished by others. Maximum operating temperature is 200°F (93°C).

Coatings – XUEB Series 200 is available with a wide selection of protective and decorative coatings.

Vibration Isolators – Base mounted neoprene or housed spring isolators are available to lessen mechanical vibration and assure quiet operation. The model XUEB is available with 1⁄4-inch of deflection neoprene isolators, free-standing isolators, restrained isolators, and housed spring isolators. Isolators are sized to match the weight of each fan.

Flanged Inlet & Outlet – Flanges are welded to the fan and are available for damper mounting or flanged duct connections. (Inlet flanges have prepunched mounting holes)

Heat Slinger & Shaft Seal – The heat slinger is an aluminum cooling disc mounted on the fan shaft between the inboard bearing and the fan housing. The disc dissipates heat that is conducted along the fan shaft. The shaft seal with an aluminum rub ring is available for applications where contaminated or high temperature air is being handled.

Dampers – Gravity or motorized parallel blade backdraft dampers can be provided. These dampers feature sturdy galvanized frames with prepunched mounting holes, aluminum blades with felt edges and a balanced design for minimal resistance to airflow. Backdraft dampers are not suitable for downblast or bottom angular downblast discharge positions. To install a backdraft damper directly to the fan, the fan must be supplied with a flanged outlet. Heavy-duty dampers are available for high-pressure applications on fans with motors equal to or greater than 71/2 horsepower.

Disconnect Switches – Assorted NEMA rated disconnect switches are available for positive electrical shutoff and safety when servicing fans.

Wiring Pigtail – Allows direct hook-up to the power supply eliminating field wiring to the fan.

 
Login   |   Register