Options and Accessories for XTIF/XIB/XID/XQEI

Options and Accessories XTIF XIB XID  XQEI

Belt Guard

Optional

 

Motor Cover

Optional

Optional

Optional

 Standard

Inlet and Outlet Companion Flanges

Optional

 Optional

Inlet and Outlet Guards

Optional

Optional

Optional

 Optional

Inspection Door

Optional

Standard

Standard

 Standard

Inspection Section

Optional

 

Isolators

Optional

Optional

Optional

 Optional

Mounting Rails

Optional

Optional

Optional

 Optional

Inlet Vane Dampers

Optional

Optional

Optional

 

Aluminum Construction

Optional

Optional

Optional

 Optional

Speed Controllers

Optional

 

Gravity Dampers

Optional

Optional

Optional

 

Control Dampers

Optional

Optional

Optional

 

Coatings

Standard

Optional

Optional

 Standard

Insulated Housing

Optional

Optional

 

Wiring Pigtail

Optional

Optional

 

NEMA-1 Disconnect

Optional

Standard

Standard

 Optional

Belt Guard – Belt guards are totally enclosed to provide protection from rotating pulleys and belts. Belt guards meet OSHA guidelines.

Motor Cover (Weatherhood) – Weatherproof motor covers shield the motor and drive components from dust, dirt and moisture when used in outdoor applications. Motor covers also provide protection from rotating pulleys and belts, and meet OSHA guidelines.

Inlet & Outlet Companion Flanges – Companion inlet flanges and outlet flanges with prepunched holes are available for all fan sizes in painted steel construction.

Inlet & Outlet Guards – Removable inlet and outlet guards provide protection for personnel and equipment in non-ducted installations. These guards meet OSHA guidelines.

Inspection Door – Bolted or hinged doors provide access for cleaning or inspection.

Inspection Section – Inspection sections serve as a length of duct that can be easily removed to provide complete access to the fan for servicing. Each section includes a bolted inspection door.

Isolators – Both, base mount or hanging isolators, are available in either neoprene or spring mounts. The isolators are furnished in sets of four and sized to match the weight of each fan.

Mounting Rails – Mounting rails are required for horizontal mounting of XTIF fans when the motor is to be located in the 3 or 9 o’clock position. Mounting rails are also recommended for all vertically mounted inline fans.

Inlet Vane Dampers – Nested inlet vane dampers for controlling air volume are available on model XTIF inline fans with Level 2 steel construction in fan sizes 12 through 36.

Aluminum Construction – Aluminum construction is available for all direct drive sizes 60-160 and belt drive sizes 70-300.

Speed Controllers - Available for use with shaded pole and permanent split capacitor (PSC) open motors on model XID fans. They provide an economical means of system balancing with direct drive fans.

Direct Drive Motor Cover – Formed galvanized steel motor covers are available to isolate direct drive motors from the airstream. When motor covers are furnished, vents to the exterior of the fan are provided to ensure sufficient motor cooling.

Gravity Dampers – Gravity or motorized parallel blade dampers (Model WD-330) are available for duct mounting. These dampers feature sturdy galvanized frames with prepunched mounting holes, aluminum blades with felt edges and a balanced design for minimal resistance to airflow.

Control Dampers – Square opposed blade volume control dampers (Model VCD) are available for duct mounting. These dampers feature sturdy galvanized frames with prepunched mounting holes, steel blades with vinyl seals and flexible metal jamb seals. A balanced design results in minimal resistance to airflow.

Coatings – Wide variety of coatings and colors are available. Decorative coatings are available in sixteen different colors. Protective coatings are available in a choice of five electrostatic applied powders providing an available selection for most environments.

Insulated Housing – For noise reduction and condensation control, the interior of the fan housing can be lined with a fiberglass duct liner (1/2 and 1 inch being standard). The optional motor cover can also be insulated.

Wiring Pigtail – Allows direct hook-up to the power supply (eliminating field wiring at the fan).

Pressure Probe – A 1/4-inch diameter tube in the fan venturi allows hook-up to the manometer (for static pressure measurement).

Electrical Accessories – Toggle type and heavy-duty disconnect switches are available for positive electrical shut off and safety in servicing fans.

 
Login   |   Register