Options & Accessories

Options and Accessories for Type 1 Hoods

Options and Accessories Make-Up Air Style Wall Canopy Single Island
(V-Bank)
Proximity (Backshelf) Pizza Oven
Exhaust Only Face Supply Face and Air Curtain Supply Exhaust Only Face Supply Exhaust Only Exhaust Only
Single Wall Double Wall
Model EW DW FW CW EV FV EP ER

Grease Grabber™ Multi-Stage Filtration System

XG--

Optional

Optional

Optional

Optional

Optional

-

Optional

Optional

Energy Recovery Filters

XT--

Optional

Optional

 -

-

 -

 -

 -

 -

Grease-X-Tractor™ Centrifugal Filtration

XX--

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Baffle Filter

XB--

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

High Velocity Cartridge Filter

XK--

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Water Wash Hood

XW--

Optional

Optional

Optional

Optional

-

-

-

-

Horizontal Supply Plenum (HSP) 

-

Optional

Optional

-

-

Optional

-

Optional

Optional

Air Curtain Supply Plenums (ASP)

-

Optional

Optional

-

-

Optional

-

-

Optional

Variable Supply Plenums (VSP)

-

Optional

Optional

-

-

Optional

-

-

Optional

Back Supply Plenum (BSP)

-

Optional

Optional

Optional

Optional

-

-

Optional

Optional

Continuous Capture

-

Optional

Optional

Optional

Optional

-

-

Optional

-

Material Options

-

Optional

Optional

Optional

Optional

Optional

Optional

Optional

-

Lighting Options

-

Optional

Optional

Optional

Optional

Optional

Optional

-

Optional

Additional Supply Duct Collars

-

-

-

Optional

Optional

Optional

Optional

-

-

Tapered Hood

-

Optional

Optional

-

-

Optional

-

-

-

*Supply Collar Shape Round/Rectangle

-

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Exhaust Collar Shipping

-

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Exhaust Collar Location (Top or Back)

-

Optional

Optional

Optional

Optional

-

-

Optional

-

Exhaust Collar Shape Round/Rectangle

-

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Switches

-

Optional

Optional

Optional

Optional

Optional

Optional

Optional

-

Ceiling Enclosures

-

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Utility Cabinets Hood Mount/Wall Mount

-

Optional

Optional

Optional

Optional

Optional

Optional

Optional/No hood mount

Optional

Backsplash Panels/Sidesplash Panels

-

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

End Skirt

-

Optional

Optional

Optional

Optional

Optional

Optional

Optional

-

Airspace/Filler Panels

-

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Exhaust Air Balancing Baffles

-

Optional

Optional

Optional

Optional

Optional

Optional

Optional

-

Finished Back

-

Optional

Optional

Optional

Optional

-

-

Optional

-

Insulated Supply Plenum

-

-

-

Optional

Optional

-

Optional

-

-

Automatic Fire Damper

-

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Filter Removal Tool

-

Optional

Optional

Optional

Optional

Optional

Optional

Optional

-

Trim Strips

-

Optional

Optional

Optional

Optional

Optional

Optional

Optional

-

*Round supply collars are not available on back supply plenums.

Filtration Options – A variety of filtration options are available with increasing grease extraction efficiencies to suit specific needs.

External Supply Plenums – Several supply plenum options are available to supply air back to the space evenly.

Continuous Capture – Provides UL Listed bolt on connection allowing end to end hoods to be connected together and appear as one hood.

Material Options – Standard construction utilizes galvanized steel behind filters in the plenum area. All stainless construction utilizes stainless steel (available in both 304 and 430 stainless steel) in these otherwise galvanized areas.

Lighting Options– Multiple lighting options are available to suit different needs. Standard lights are Incandescent fixtures. Recessed incandescent and 2-4 foot recessed fluorescent or LED fixtures are also available. All fixtures are vapor proof and UL approved.

Tapered Hood – For low ceiling applications the front edge of exhaust only canopy hoods are available in 3 inch increments from 18 to 12 inches. Tapered hoods are only available with a 24 inch back height. 12 inch front tapered hoods require 12 inches of overhang on all exposed sides (where other canopy hoods require only 6 inches).

Exhaust Collar Location – For mounted exhaust collars, placement can be made anywhere within the plenum area in either a top or back location.

Exhaust Collar Shipping – Shipping exhaust collars loose provides an exhaust collar to be used, but no exhaust cutout in the hood. This enables the contractor to locate and cut the exhaust opening where desired when not known ahead of time.

Exhaust Collar Shape Round/Rectangle – To accommodate various duct work, several sizes of rectangular and round collars are available.

Additional Supply Duct Collars – To keep supply air flow velocities around the hood low, additional supply collars can be added for higher supply cfm amounts.

Supply Collar Shape Round/Rectangle – To accommodate various duct work, different sized collars are available on most supply plenums in both round and rectangular forms.

Ceiling Enclosure – When the top of the hood is mounted lower than the finished ceiling height, stainless steel enclosure panels can be provided in 304 or 430 stainless steel to match your hood. These enclosures create an aesthetically pleasing finish.

Backsplash Panels/Side Splash Panels – Stainless steel sheets to cover back/side walls. Provides an aesthetically desirable and easily cleanable surface behind or on adjacent walls near the hood. Constructed of 430 or 300 series SS to match the hood. Also available with 1-inch insulation.

End Skirts – End skirts are available in both full and mini configurations and are constructed with either 430 or 300 series SS to match our hood. End skirts can lower required exhaust rates as they improve capture and containment and also remove the need for 6 inch end overhang.

Airspace/Filler Panels – To assist with clearances to combustible surfaces, stainless steel airspaces can be supplied. These panels can also be used to fill in open spaces and/or improve aesthetics.

Exhaust Air Balancing Baffles – To help balance exhaust airflow between separate hoods or hood sections being exhausted through 1 duct line. Air balancing baffles can be mounted at the exhaust collar openings which allow the exhaust opening to be closed up to 50%.

Switches – Switches can be mounted remotely or on the hood cabinet.

Finished Back – With most wall canopy hoods, hanging is done against a wall making the need for an aesthetically pleasing finished back unnecessary. For instances in which the back is visible, a similar finish as the other 3 sides of the hood can be provided.

Insulated Supply Plenum – With some plenums, condensation can occur from bringing in cold air near to where hot air is being exhausted. By insulating these plenums, problems with condensation are alleviated. This also this helps prevent cooler incoming air from being heated by warmer exhaust air.

Automatic Fire Damper – In areas where exhaust fire dampers are required, a UL Listed motorized butterfly damper can be installed in the exhaust collar that closes at 285 degrees Fahrenheit.

Utility Cabinets Hood Mount/Wall Mount – Utility Cabinets for fire system and/or control mounting can be attached to the left or right side of he hood. All hoods can be supplied with a cabinet to be remote mounted in the space.

Filter Removal Tool – To enable operators to safely reach and remove filters from the hood while standing on the floor in front of appliances.

Trim Strips – Stainless steel strips that can be used anywhere hood sections meet to improve aesthetics.

 
Login   |   Register