Options and Accessories for XRUBS/XRUB/XRUD/XSEB/XSED

Options and Accessories XRUB XRUD XSEB XSED XRUBS
Roof Curbs Optional Optional

Optional

Vented Curb Extensions

Optional

Optional

Optional

Disconnect Switches

Standard

Standard

Standard

Standard

Standard

Hinge Kit

Optional

Optional

Optional

Hinged Base

Optional

Optional

Standard

Grease Trap

Optional

Optional

Optional

Grease Trap with Absorbent Material

Optional

Optional

Optional

Non-Stick Wheel

Optional

Optional

Standard

Windband Extension

Optional

Optional

Coatings

Optional

Optional

Optional

Optional

Standard

Clean Out Port

Optional

Optional

Standard

Birdscreen

Optional

Optional

Standard

Standard

Self-Draining Grease System

Optional

Optional

Optional

Curb Seal

Optional

Optional

Optional

Dampers

Optional

Optional

Optional

Optional

Tie-Down Points

Optional

Optional

Optional

Drain Connection

Optional

Optional

Optional

Speed Controllers

Optional

Optional

Roof Curbs – Wide variety of roof curbs are available for mounting the fan to the roof, including: vented, flanged, pitched, and sound-absorbing.

Vented Curb Extensions – Mounts between roof curb and roof mounted fans to meet NFPA requirements of 40 in. (101.6 cm) minimum discharge above the roof when mounted on a minimum 8 in. (20.32 cm) high roof curb.

Disconnect Switches – Assorted NEMA rated switches are available for positive electrical shutoff and safety, including: dust-tight, rainproof and corrosion-resistant.

Hinge Kit – Allows maintenance personnel to hinge the entire fan up to gain access to wheel and ductwork for regular inspection and cleaning. (Roof Upblast only)

Hinged Base – Allows for easy maintenance. Hinge and restraining cables are factory mounted to a subbase attached directly to curb without additional height added.

Grease Trap – Aluminum trap designed to collect grease residue to avoid drainage onto roof surface. (Roof Upblast only)

Grease Trap with Absorbent Material – Same as above, with an absorbent material to collect grease residue for easy disposal. (Roof Upblast only)

Windband Extension – Aluminum tube raises fan’s discharge an additional 36 in. (91.44 cm) for special code requirements.

Non-Stick Wheel – Patented coating helps prevent wheel imbalance in heavy grease applications and allows build-up on wheel to be easily removed. Patent No. 5,809,993

Coatings – Wide variety of coatings and colors are available for decorative to acidic applications.

  • Permatector™ is our standard coating, typically used for applications that require corrosion resistance in indoor and outdoor environments.
  • Hi-Pro Polyester is resistant to salt water, chemical fumes and moisture within more corrosive atmospheres.
  • Baked Enamel Decorative Coatings come in 16 standard, decorative colors or color match any color.

Clean Out Port – Patented removable plug allows for easy spray or steam cleaning of wheel through the windband. (Roof Upblast only) Patent No. 5,809,993

Birdscreen – Galvanized or aluminum rigid wire to protect the fan’s discharge from birds or small objects. (Galvanized is standard on Sidewall)

Self-Draining Grease System – Drain grease and rain water back through the ductwork into the specially designed Accurex hood. The hood then channels grease and rain water into the restaurant’s floor grease trap.

Curb Seal – Rubber seal between fan and curb to assure proper sealing when attached to a curb.

Dampers – Designed to prevent outside air from entering back into the building when fan is off. Includes: backdraft and motorized dampers. (N/A with UL/C-UL US 762)

Tie-Down Points – Four brackets located on the windband for securing the fan in heavy wind applications.

Drain Connection – Allows for single-point drainage of grease, water or other residue. (Roof Upblast only)

Speed Controllers – Available for use with shaded pole and permanent split capacitor open motors on direct drive fans. They provide an economical means of system balancing.

 
Login   |   Register