Options & Accessories for Type II Hoods

Options & Accessories Heat/Oven Condensate
No Baffle 1 Baffle 2 Baffles
XO XD1 XD2 XD3
Material Options Standard Standard Standard Standard
Incandescent Lighting Optional Optional Optional -
Horizontal Supply Plenum (HSP) Optional Optional Optional Optional
Air Curtain Supply Plenums (ASP) Optional Optional Optional Optional
Variable Supply Plenums (VSP) Optional Optional Optional Optional
Back Supply Plenum (BSP) Optional Optional Optional Optional
Mesh Filter Optional Optional - -
Exhaust Collar Shipping Optional Optional Optional Optional
Exhaust Collar Shape Round/Rectangle Optional Optional Optional Optional
Switches Optional Optional Optional -
Ceiling Enclosures Optional Optional Optional Optional
Utility Cabinets Hood Mount/Wall Mount Optional Optional Optional Optional
Backsplash Panels/Sidesplash Panels Optional Optional Optional Optional
End Skirt Optional Optional Optional Optional
Airspace/Filler Panels Optional Optional Optional Optional
Exhaust Air Balancing Baffles Optional Optional Optional Optional
Trim Strips Optional Optional Optional Optional

Material Options – All Type II hoods are made with 100% stainless steel construction that can be made of either 430 or 300 series stainless steel.

Incandescent Lighting – UL Listed vapor proof incandescent light fixtures are available.

Exhaust Collar Shipping – Shipping exhaust collars loose provides an exhaust collar to be used, but no exhaust cutout in the hood. This enables the contractor to locate and cut the exhaust opening where desired when not known ahead of time.

Exhaust Collar Shape Round/Rectangle – To accommodate various duct work, several sizes of rectangular and round collars are available.

External Supply Plenums – Several supply plenum options are available to supply air back to the space evenly.

Switches – Switch mounting on the hood cabinet or remote are available as an option in Accurex Type II hoods.

Mesh Filter – With most Type II hoods, the exhaust opening is exposed. Adding a mesh filter in the exhaust collar helps prevent anything other than heat and moisture from passing through the duct opening.

Ceiling Enclosure – When the top of the hood is mounted lower than the finished ceiling height, stainless steel enclosure panels can be provided in 304 or 430 stainless steel to match your hood. These enclosures create an aesthetically pleasing finish.

Utility Cabinets Hood Mount/Wall Mount – Utility Cabinets for fire system and/or control mounting can be attached to the left or right side of he hood. All hoods can be supplied with a cabinet to be remote mounted in the space.

End Skirts – End skirts are available in both full and mini configurations and are constructed with either 430 or 304 stainless steel to match our hood. End skirts can lower required exhaust rates as they improve capture and containment.

Backsplash Panels/Side Splash Panels – Stainless steel sheets to cover back/side walls. Provides an aesthetically desirable and easily cleanable surface behind or on adjacent walls near the hood. Constructed of 430 or 300 series SS to match the hood. Also available with 1 inch insulation.

Airspace/Filler Panels – To assist with clearances to combustible surfaces, stainless steel airspaces can be supplied. These panels can also be used to fill in open spaces and/or improve aesthetics.

Exhaust Air Balancing Baffles – To help balance exhaust airflows between separate hoods or hood sections being exhausted through one duct line. Air balancing baffles can be mounted at the exhaust collar openings which allow the exhaust opening to be closed up to 50%.

Trim Strips – Stainless steel strips to be used anywhere hood sections meet to improve aesthetics.

 
Login   |   Register