Proximity (Backshelf) Flue Bypass Hoods

Accurex's flue bypass proximity hoods are a great solution for heavy heating loads from appliance flues. Instead of the heat passing through the face of the filters and radiating back on the cooking staff and increasing the cooling requirements in the kitchen, the hot flue air is ducted directly to the back of the plenum.

Accurex can fully integrate your kitchen ventilation system by designing a package with our leading exhaust fans, make-up air units and control products perfectly matched to the facility they are servicing.

Product Features & Advantages:

  • Energy Efficient - PEL technology redirects airflow improving capture and performance, reducing exhaust and supply airflow.
  • Flue Bypass – Reduces heat load to the space and minimizes grease baking on to filters by directing hot flue gases into the plenum bypassing the filters.
  • Superior Manufacturing -  Provides a consistent quality finish
  • Stainless Steel - 430 stainless and 300 series available.
  • Standing Seam Construction - Provides superior strength and reduced weight for easy installation
  • Short Lead-times
  • Sloped Integral 3” Airspace - Complies with NFPA 96 requirements and improves performance.
  • UL 710 Listed - 400 F, 600 F and 700 F ratings, NSF Certified and built in accordance with NFPA 96.
  • Industry Leading Grease Removal – Hoods available with the Grease X-Tractor™ or Grease Grabber™ for the best grease removal efficiency in the industry. Baffle filters standard.
  • Design Options - Plate shelf, pass thru, or standard enclosures to meet operational requirements.

Filtration Options

-

Options and Accessories

Click here to view all our options and accessories

-

Performance and Sizing Availability for Models

XBEP. XXEP. XGEP. XKEP

Max Cooking Surface Temp,°F

Minimum Exhaust Airflow (cfm/ft)*

450

105

600

135

*Exhaust airflow is capable of being as low as listed above.

 

Max Cooking Surface Temp,°F

Length (ft)**

Width (in)***

Height From Front Lower Edge of Hood (in)***

Side Over-Hang (in)***

Hood Set-Back (in)***

Min

Max

Min

Max

Min

Max

Min

Max

450

3

16

23

36

10

36

0

12

600

**Hoods lengths are available in 1 inch increments. Max length is the length of a single section.  
Total hood lengths can be greater than 16 feet, but will be manufactured in multiple sections.
***Hood widths are available in 3 inch increments.

Please consult your Accurex representative or CAPS (Computer Aided Product Selection) program for other available dimensional configuration options.

-

Model Designation Guide - Type 1 Canopy Hoods

 
 
Login   |   Register